[U-Boot-Users] Problem while Enabling Data Cache for MPC8260 based custom board

[Scott Harper]

I see this problem here also.

If it is the same problem I noted this when looking at triggers off of the 
backplane but did not see this with the REV 1 transition module.  I will see 
if this is the same problem or maybe something new.  In either case expect an 
answer tomorrow about this.

Scott

On Wednesday 03 August 2005 09:36, Wolfgang Denk wrote:
> In message <D8595042F3765A4285B848A78A2C2ED18A6717 at bsdmsg002.corp.satyam.ad> 
you wrote:
> > We have designed MPC8260 based custom board. I enabled I-Cache and
> > u-boot still works. But as soon as I enabled D-Cache nothing comes up on
> > Hyper Terminal.
>
> It is always a good idea to read the documentation *before*  posting,
> especially the README. It has a special "Note" section about this. If
> you ignore it you get what you ask for - trouble.
>
> Best regards,
>
> Wolfgang Denk

-- 
Scott Harper
Senior Software Engineer
ELI
scott at lassen.com
fax: 360 697 3746
Phone: 360 697 3746