[U-Boot-Users] Problem while Enabling Data Cache for MPC8260 based custom board

[Scott Harper]

Wrong list different problem.  Not related at all. 

My apologies.

Scott

On Wednesday 03 August 2005 10:23, Scott Harper wrote:
> I see this problem here also.
>
> If it is the same problem I noted this when looking at triggers off of the
> backplane but did not see this with the REV 1 transition module.  I will
> see if this is the same problem or maybe something new.  In either case
> expect an answer tomorrow about this.
>
> Scott
>
> On Wednesday 03 August 2005 09:36, Wolfgang Denk wrote:
> > In message
> > <D8595042F3765A4285B848A78A2C2ED18A6717 at bsdmsg002.corp.satyam.ad>
>
> you wrote:
> > > We have designed MPC8260 based custom board. I enabled I-Cache and
> > > u-boot still works. But as soon as I enabled D-Cache nothing comes up
> > > on Hyper Terminal.
> >
> > It is always a good idea to read the documentation *before*  posting,
> > especially the README. It has a special "Note" section about this. If
> > you ignore it you get what you ask for - trouble.
> >
> > Best regards,
> >
> > Wolfgang Denk

-- 
Scott Harper
Senior Software Engineer
ELI
scott at lassen.com
fax: 360 697 3746
Phone: 360 697 3746