[U-Boot-Users] LAN chip dead on ARM Integrator/CP board

[Umar Qureshey]

Hi,

I am using an ARM Integrator/CP board with u-boot 1.1.3.  It's working 
well except that the ethernet interface never comes up.  I don't see the 
link lights and a "dhcp" command results in:

SMC91111: PHY auto-negotiate timed out

*** ERROR: ethaddr is not set properly!!

I compiled u-boot using the integrator cp config file.  I have modified 
it somewhat to include some extra commands but the network portion 
remains the same.  Also, the docs for the board state that the board has 
a LAN91C111 ethernet chip.  Anyone encontered this issue?  I did not 
find anything in list archives.

Regards,
umar