[U-Boot-Users] LAN chip dead on ARM Integrator/CP board
wd at denx.de
Thu Dec 22 00:46:05 CET 2005
In message <43A9B85D.6070200 at quartics.com> you wrote:
> link lights and a "dhcp" command results in:
> SMC91111: PHY auto-negotiate timed out
> *** ERROR: ethaddr is not set properly!!
Now isn't this is clear hint?!?
> I compiled u-boot using the integrator cp config file. I have modified
> it somewhat to include some extra commands but the network portion
> remains the same. Also, the docs for the board state that the board has
> a LAN91C111 ethernet chip. Anyone encontered this issue? I did not
> find anything in list archives.
1) What does the above error message tell you, and why did you ignore it?
2) Why didn't you try current code?
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"We Americans, we're a simple people... but piss us off, and we'll
bomb your cities." - Robin Williams, _Good Morning Vietnam_
More information about the U-Boot