[U-Boot-Users] Dropped Eth frames on Lite5200 evb

[Wolfgang Denk]

In message <528646bc0502081428f013b1f at mail.gmail.com> you wrote:
> 
> I'm working with u-boot 1.1.2 on a Lite5200 eval board.

Try using current code, i. e. top of VS.

> dBUG is installed in FLASH
> u-boot is compiled with TEXT_BASE=0x100000

It's time for you to read the FAQ:
http://www.denx.de/twiki/bin/view/DULG/CanUBootBeConfiguredSuchThatItCanBeStartedInRAM

> what is going on.  This just confirmed that the driver is not
> detecting incoming frames.

Bad cable?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There's no future in time travel.