[U-Boot-Users] Re: u-boot and linux-2.6.9

[Peter Pearse]

Alan

Try setting the CP switch S2[1] ON (down) so that U-Boot is run after
the ARM Boot Monitor.
- either by hand or automatically.

If your kernel then boots OK the problem is the failure to remap. 

This is solved by my multicore patch:-
[Patch]IntegratorAP & CP multi core module support   
2005-02-02 08:43 

If your kernel does not boot with switch S2[1] ON then IMHO, 
the problem lies in your kernel,

Peter
------------------------ Peter.Pearse at arm.com
-------------------------