[U-Boot-Users] U-boot-1.1.1 on V2P4_FG456 uartlite problem

[Der Herr Hofrat]

HI !

 U-boot-1.1.1 (started out with ml300 config)
 toolchain from EDK6.2 (gcc-2.95.3,binutils-2.11.2).

 I'm bringing up u-boot on a 2VP4_FG456 REV4 (memec board) - for now the
 setup is reduced to ram+serail (uart-lite) - the problem I have is that
 I get the correct output but it seems like it is being read back as 
 input in an infinite loop just starting the board without ever typing 
 anything in minicom gives me:

U-Boot 1.1.1 (Feb 18 2005 - 19:05:13)


### No HW ID - assuming ML300
DRAM:  16 MB
Top of RAM usable for U-Boot at: 01000000
Reserving 95k for U-Boot at: 00fe8000
Reserving 136k for malloc() at: 00fc6000
Reserving 112 Bytes for Board Info at: 00fc5f90
Reserving 48 Bytes for Global Data at: 00fc5f60
Stack Pointer at: 00fc5f48
New Stack Pointer is: 00fc5f48
Now running in RAM - U-Boot at: 00fe8000
Using default environment

In:    serial
Out:   serial
Err:   serial
U-Boot relocated to 00fe8000
### main_loop entered: bootdelay=3

### main_loop: bootcmd=""
Hit any key to stop autoboot:  3  0 
=> => 
Unknown command '=>' - try 'help'
=> 
=> 
=> => 
Unknown command '=>' - try 'help'
=> 
=> 
=> => tt:  -'
...

 Does anybody have an idea how I can pinpoint that problem - any idea 
 what could be the cause of the problem ?

thx !
hofrat