[U-Boot-Users] Console Problems on MPC8280 based A&M Rattler board

[Caruso, Nick]

Perhaps the baud rate on the console is changing at that transition?
I've seen that particular "mysterious failure mode" once.

________________________________

	From: u-boot-users-admin at lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net] On Behalf Of Srivatsan
	Sent: Thursday, February 24, 2005 3:24 AM
	To: u-boot-users at lists.sourceforge.net
	Subject: [U-Boot-Users] Console Problems on MPC8280 based A&M
Rattler board
	
	
	Hi,
	 
	We are trying to port linux 2.4.20 for the mpc8280 Rattler
board.
	Kernel boot seems to stop after printing "Now booting the
kernel".
	But from the log buffer(Starting at 0x194654) dump it looks like
it is
	well crossing this stage.
	 
	The last message that was dumped in the log buffer is:
	 
	00194EB4: 3C 34 3E 65 74 68 30 3A  20 63 6F 6E 66 69 67 3A
|<4>eth0:
	config:|
	00194EC4: 20 61 75 74 6F 2D 6E 65  67 6F 74 69 61 74 69 6F  |
auto-
	negotiatio|
	00194ED4: 6E 20 6F 6E 2C 20 31 30  30 48 44 58 2C 20 31 30  |n
on,
	100HDX, 10|
	00194EE4: 48 44 58 2E 0A 00 00 00  00 00 00 00 00 00 00 00  |
	HDX.............|
	00194EF4: 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
	|................|
	 
	The boot loader used is u-boot.
	 
	Any pointers to why messages after "Now booting the kernel" are
not
	getting on to the console ?.Thanks for your time.
	 
	 
	regards,
	C.R.Srivatsan
	 
	 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20050224/13811982/attachment.htm