[U-Boot-Users] how to set the cfg_flash base, monitor base an d TEXT_BASE

[Apoorv_Sangal]

Thanks Sam for the reply.
We have customized UBOOT code on our 8266 based PMC addin board.
Can you please let me know if there are any particular registers I need to
look into.

Thanks & Regards,
Apoorv Sangal

-----Original Message-----
From: Sam Song [mailto:samsongshu at yahoo.com.cn] 
Sent: Tuesday, January 04, 2005 10:38 AM
To: Apoorv_Sangal
Cc: u-boot-users at lists.sourceforge.net
Subject: RE: [U-Boot-Users] how to set the cfg_flash base, monitor base an d
TEXT_BASE 

Apoorv_Sangal <Apoorv_Sangal at satyam.com> wrote：
>
> Can anyone tell me why this is happening and how i
> can correct it.
> 

IMHO, it's the problem of your register setting. Well,
have you seen any serial output so far? If there is a 
boot loader like PlanetCore on your target, you could
refer to those workable parameter value for your
start. If not, pls prepare to look into your hardware
configuration more and 8266 registers to figure out
these settings. 

=====
Best regards,

Sam

_________________________________________________________
Do You Yahoo!?
150万曲MP3疯狂搜，带您闯入音乐殿堂
http://music.yisou.com/
美女明星应有尽有，搜遍美图、艳图和酷图
http://image.yisou.com
1G就是1000兆，雅虎电邮自助扩容！
http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1
g/
************************************************************************** 
This email (including any attachments) is intended for the sole use of the
intended recipient/s and may contain material that is CONFIDENTIAL AND
PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or
distribution or forwarding of any or all of the contents in this message is
STRICTLY PROHIBITED. If you are not the intended recipient, please contact
the sender by email and delete all copies; your cooperation in this regard
is appreciated.
**************************************************************************