[U-Boot-Users] how to set the cfg_flash base, monitor base an d TEXT_BASE

[Sam Song]

Apoorv_Sangal <Apoorv_Sangal at satyam.com> wrote:
> We have customized UBOOT code on our 8266 based PMC
> addin board.
> Can you please let me know if there are any
> particular registers I need to look into.

Well, my poor experience of 8xx porting hasn't
entitled me to point out the WANTED register, I am
afraid. I just gave the hint for you to make sure some
key registers settings. You could check the register
listed on <your-board>.h, especially DER, SIUMCR,
PLPRCR、SCCR、BRx、ORx. They would take some effect on
U-Boot init before u-boot relocation, which you could
see some characters output from serial monitor port.

=====
Best regards,

Sam

_________________________________________________________
Do You Yahoo!?
150万曲MP3疯狂搜，带您闯入音乐殿堂
http://music.yisou.com/
美女明星应有尽有，搜遍美图、艳图和酷图
http://image.yisou.com
1G就是1000兆，雅虎电邮自助扩容！
http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1g/