[U-Boot-Users] How to set the Ethernet Address for LXT971A.

Bharath G - CTD , Chennai bharathg at hcltech.com
Sat Jan 15 06:43:19 CET 2005


Hi Prathima,

		If you want to configure your PHY, you will need see how
your Processor is interfaced with the PHY.I use a MPC8270 based custom board
and i use a FPGA to configure my PHY. 

	If you are using the processors port pins for your PHY Management,
see /common/miiphybb.c to use bit banging, Set your MACROS for bit banging
in your include/configs/board-header-file.h .

Hope this helps,

Cheers,

.Bharath.


Everything has its beauty but not everyone sees it. 
	Confucius

-----Original Message-----
From: Prathima_Kolar [mailto:Prathima_Kolar at Satyam.com]
Sent: Saturday, January 15, 2005 10:47 AM
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] How to set the Ethernet Address for LXT971A.


Hello All,

I am customizing U-boot for the Ethernet interface in our 8266 based PMC
Addin board.
We are using the Intel LXT971A Ethernet chip.
Can anyone please let me know how and where to set the Ethernet Address in
U-boot?

Thanks and Regards,
Prathima Kolar.



************************************************************************** 
This email (including any attachments) is intended for the sole use of the
intended recipient/s and may contain material that is CONFIDENTIAL AND
PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or
distribution or forwarding of any or all of the contents in this message is
STRICTLY PROHIBITED. If you are not the intended recipient, please contact
the sender by email and delete all copies; your cooperation in this regard
is appreciated.
**************************************************************************


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
DISCLAIMER 
This message and any attachment(s) contained here are information that is confidential, proprietary to HCL Technologies 
and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the 
individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to 
read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, 
please notify the sender immediately by return e-mail and delete it from your computer





More information about the U-Boot mailing list