[U-Boot-Users] Problem with MPC8272ADS FCC Ethernet TX at 10 Mb/s half-duplex

Nghiem, Tien TNghiem at oerlikon.ca
Wed Mar 9 16:09:38 CET 2005


Check if the mii_discover_phy() is enable in the u-boot code.


-----Original Message-----
From: u-boot-users-admin at lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of Martin
Sent: Tuesday, March 08, 2005 6:02 PM
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Problem with MPC8272ADS FCC Ethernet TX at 10
Mb/s half-duplex

We seem to be having a problem with the MPC8272ADS
board when connected to a hub (10 Mb/s half-duplex).
u-boot is not able to ping anything. As anyone seen
this problem? It looks like its a hardware problem
(PHY or FCC) but I am curious as anyone been able to
use this board with 10 Mb/s half-duplex hub?


Celebrate Yahoo!'s 10th Birthday! 
Yahoo! Netrospective: 100 Moments of the Web 

SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net

More information about the U-Boot mailing list