[U-Boot-Users] uboot and Pci in Pq2fads-ZU
Bharath G - CTD , Chennai
bharathg at hcltech.com
Wed Mar 16 07:58:20 CET 2005
Thank you very much for the inputs. I tried undef'ing the
Local bus , still dosent seem to work, infact that was the first thing i
did. I have been successful in bringing up u-boot on my target board which
also has a PCI Interface on the local bus (it dosent have a LSDRAM there).
Am i missing something here ? Any BCSR's or PCI registers to be configured
Yeah sure will try adding the PCI stuff to this board and see if it works.
I was also wondering if anyone has got PCI working on PQ2FADS-ZU board with
Thanks once again for the help,
Reason is not useless, but reason is not enough. [...] Reason and faith are
like two shoes -- you can get a lot further with both than with just one. -
Character on Babylon 5
From: Marco Schramel [mailto:Schramel.Linux at go.bartec.de]
Sent: Tuesday, March 15, 2005 7:56 PM
To: Bharath G - CTD , Chennai; U-BOOT
Subject: Re: [U-Boot-Users] uboot and Pci in Pq2fads-ZU
>I am using a PQ2FADS-ZU board with u-boot.I have an option to change
>jumpers and DIP Switches for setting the local bus to PCI mode.
Which interface do you use pci or local bus?
If you use pci, you will add the pci stuff (see board: pm828) in your board
file and undef the local bus sdram settings .
This message and any attachment(s) contained here are information that is confidential, proprietary to HCL Technologies
and its customers. Contents may be privileged or otherwise protected by law. The information is solely intended for the
individual or the entity it is addressed to. If you are not the intended recipient of this message, you are not authorized to
read, forward, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error,
please notify the sender immediately by return e-mail and delete it from your computer
More information about the U-Boot