[U-Boot-Users] Re: Baudrate of UART in U-Boot

[Yusuf Ibrahim Ozkok]

Hi,

You should change the CONFIG_BAUDRATE, defined in the board config header file (/include/configs/<board_name.h>). 

But before that you should set CFG_NS16550_CLK in the same file to the appropriate console uart frequency. If that is not set correctly the baudrate generator in the console uart could not calculate the baudrates defined by CONFIG_BAUDRATE, appropriately.

Hope to help...

Best Wishes.

Yusuf Ibrahim Ozkok
Software Eng.
ASELSAN Inc.

######################################################################
Dikkat:

Bu elektronik posta mesaji kisisel ve ozeldir. Eger size 
gonderilmediyse lutfen gondericiyi bilgilendirip mesaji siliniz. 
Firmamiza gelen ve giden mesajlar virus taramasindan gecirilmekte, 
guvenlik nedeni ile kontrol edilerek saklanmaktadir. Mesajdaki 
gorusler ve bakis acisi gondericiye ait olup Aselsan A.S. resmi 
gorusu olmak zorunda degildir.

######################################################################
Attention: 

This e-mail message is privileged and confidential. If you are 
not the intended recipient please delete the message and notify 
the sender. E-mails to and from the company are monitored for 
operational reasons and in accordance with lawful business practices. 
Any views or opinions presented are solely those of the author and 
do not necessarily represent the views of the company.

######################################################################
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20050503/72d03bfd/attachment.htm