[U-Boot-Users] how to enable autoboot feature in u-boot

[Wayne Lee]

Hi, u-boot folks,

I just program my u-boot port in to flash.
After press board reset button, u-boot only enters prompt mode, like
follows.

U-Boot 1.1.2 (May  6 2005 - 15:58:37)

U-Boot code: 03F80000 -> 03F920B8  BSS: -> 03F93938
RAM Configuration:
Bank #0: 00000000 64 MB
Flash:  4 MB
In:    serial
Out:   serial
Err:   serial
U-Boot #

How to enable the "autoboot" feature?
I would like u-boot to auto boot uClinux system after reset/power on.

Hit any key to stop autoboot: 0
## Booting image at 20100000 ...

Thanks.
Wayne