[U-Boot-Users] (no subject)

[zhonglei]

When I fire up the board,the U-boot reports are as follows:
********************************************************
U-Boot 1.1.2 (May 10 2005 - 08:54:34)                                     

CPU:   MPC5200 v1.2 at 396 MHz                              
       Bus 132 MHz, IPB 66 MHz, PCI 33 MHz                                          
Board: Motorola MPC5200 (IceCube)                                 
I2C:   85 kHz, ready                    
DRAM:  32 MB            
FLASH:  0 kB            
*** Warning - bad CRC, using default environment                                                

PCI:   Bus Dev VenId DevId Class Int                                    
        00  1a  1057  5803  0680  00                                    
In:    serial             
Out:   serial             
Err:   serial             
Net:   FEC ETHERNET                   
IDE:   Bus 0: ............................................................** Tim                                                                                
eout **       

Type "run flash_nfs" to mount root filesystem over NFS                                                      

Hit any key to stop autoboot:  0                                
=>  
**********************************************************
Is it ok? What's the problem on "FLASH:  0 kB            
*** Warning - bad CRC, using default environment     "?
It can not find my flash on board?

Best Regards
zhonglei