[U-Boot-Users] Re: U-Boot and 64260 ethernet controller.

Arun arun at rassit.com
Tue Nov 8 14:00:42 CET 2005


Hai Steve

Even we are using a board with 750Cxe and Gt64260 and we are successfully  
running ethernet and linux

>> Greetings.

>> I was curious if anyone had experienced an issue I am having with
>> the ethernets on the Discovery I chip (64260). Essentially, I am
>> bringing up new hardware with U-Boot and I am able to get the
>> ethernets initialized, I can start sending a ping, I see the ARP
>> request go over the wire from my board, I see the ARP reply come
>> back, but my ethernets never get any packets. All I get are a
>> bunch of Rx Resource Errors with no packets received. I should note
>> that a custom and closed source bootloader is already successfully
>> working and booting Linux. I have everything working except for the
>> ethernets. If anyone has some insight, I would be very grateful. I
>> am using a 750 CXe processor with this board. Thanks.

>> -Steve
So please tell us what all changes related to ethernet who have done , so  
that we can help you.


Regards
Arun Kumar





More information about the U-Boot mailing list