[U-Boot-Users] AT91 and u-boot tests

[Wolfgang Denk]

In message <001f01c5c82a$4e86b5c0$0600a8c0 at kmobile> you wrote:
>
> u-boot always configured and compiled "as is" for at91rm9200dk

You are aware that you cannot use the  same  configuration  for  your
tests?

> u-boot-1.1.3
> ------------
> - running in ram : DOES NOT BOOT
> - stored in flash with boot.bin as pre-loader
>   and then u-boot as bootloader : DOES NOT BOOT
> - stored in flash as unique bootloader : OK BUT FAILS KERNEL UNCOMPRESSION
> 
> P.S. Looking into boot.bin sources seems that it required for
> Master clock, PLL frequency and SDRAM very low level settings.

Your message is not helpful as it is totally unclear  if  you  change
the  configuration  (i.  e. with or without CONFIG_SKIP_LOWLEVEL_INIT
and/or CONFIG_SKIP_RELOCATE_UBOOT #defined in your cofiguration which
is *essential*. Please make sure to read the documentation (README).

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Die ganzen Zahlen hat der liebe Gott  geschaffen,  alles  andere  ist
Menschenwerk...                                     Leopold Kronecker