[U-Boot-Users] Valid Addresses-pxa270
Swapnil Ashok Narkhede
S3092131 at student.rmit.edu.au
Wed Oct 5 13:04:03 CEST 2005
Hi,
I am now trying to load MontaVista
Linux OS on to the pxa270 of
Mainstone 2 board.
The memory map for PXA270 is
0xA000_0000->SDRAM Partition 3 (64 Mbyte)
0xA400_0000->SDRAM Partition 2 (64 Mbyte)
0xA800_0000->SDRAM Partition 1 (64 Mbyte)
0xAC00_0000->SDRAM Partition 0 (64 Mbyte)
When i make uImage i specify the load
address and entry point address as
0xa0008000 respectively.
I load the OS image into FLASH at
0x00040000. I issue command
bootm 0x00040000 for the execution
of the OS image. But i get to
"Starting Kernel ..."
and the system hangs. I know this is
the state when we donot specify
appropriate load address and entry
point addresses. But as per the
memory map that is specified the
load and entry point addresses i
specified seems to be proper.
Please let me know if this
seems to be improper addresses
or what else could be the
cause for this.
Eagerly awaiting your reply.
Regards,
Swapnil Narkhede
Mob:- 0432025023
Email:- s3092131 at student.rmit.edu.au
School of Computer Science and Information Technology
RMIT University, Melbourne
More information about the U-Boot
mailing list