[U-Boot-Users] Re: Bdi and u-boot

[Srivatsan CR]

Hi,

    Check whether you have commneted the memory initialization part in your
BDI configuration file. In the BDI configuration file, init memory
controller and init SDRAM should be commented and also comment the IMMR
initialization while debugging u-boot code. If proper address of IMMR
[address is configured by HRCW] is not got, the board might be receiving a
Watchdog reset, which by default is set.

Hope this helps.

With Regards,
C.R.Srivatsan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20051005/96e4596e/attachment.htm