[U-Boot-Users] U-Boot 1.1.3 does not boot with MPC8349E

[Kumar Gala]

On Oct 10, 2005, at 3:38 PM, Jeff Angielski wrote:

> On Mon, 2005-10-10 at 18:15 +0200, flobe01 at arcor.de wrote:
>
>> Has anybody tried to bring up U-Boot 1.1.3 together with a
>> (Power Quicc II Pro) MPC8349E MDS Processor Board (silicon rev 1.0)?
>> The board comes with a (probably patched) 1.1.2 version installed.
>> I want to update it to 1.1.3 in order to be able to use a current
>> Linux kernel (2.6.13 - U-Boot 1.1.2 seems to be incompatible due
>> to differences in the bd_info structures, right?).
>>
>
>
>> Are there any board settings necessary other than those defaults
>> in the Getting Started guide?
>>
>
> I noticed that when I moved from 1.1.2 to 1.1.3, I had to go back and
> add the CONFIG_CPM2 macro to the boards config file.  It appears that
> there was patch between revisions that now requires this being set.
>
> Other than that, it looks like it's time to pull out the BDI2000...

This is very odd since the 8349 shouldn't need CONFIG_CPM2.  It  
doesn't have a CPM on it.

- kumar