[U-Boot-Users] U-Boot 1.1.3 does not boot with MPC8349E

[Jeff Angielski]

On Mon, 2005-10-10 at 18:00 -0500, Kumar Gala wrote:
> On Oct 10, 2005, at 3:38 PM, Jeff Angielski wrote:
> 
> > On Mon, 2005-10-10 at 18:15 +0200, flobe01 at arcor.de wrote:
> >
> >> Has anybody tried to bring up U-Boot 1.1.3 together with a
> >> (Power Quicc II Pro) MPC8349E MDS Processor Board (silicon rev 1.0)?
> >> The board comes with a (probably patched) 1.1.2 version installed.
> >> I want to update it to 1.1.3 in order to be able to use a current
> >> Linux kernel (2.6.13 - U-Boot 1.1.2 seems to be incompatible due
> >> to differences in the bd_info structures, right?).
> >>
> >
> >
> >> Are there any board settings necessary other than those defaults
> >> in the Getting Started guide?
> >>
> >
> > I noticed that when I moved from 1.1.2 to 1.1.3, I had to go back and
> > add the CONFIG_CPM2 macro to the boards config file.  It appears that
> > there was patch between revisions that now requires this being set.
> >
> > Other than that, it looks like it's time to pull out the BDI2000...
> 
> This is very odd since the 8349 shouldn't need CONFIG_CPM2.  It  
> doesn't have a CPM on it.

Well, that makes it easy.  Ignore what I said about putting it in the
configuration file since it does not apply to your flavor of PPC
processor.

Jeff Angielski