[U-Boot-Users] U-Boot 1.1.3 does not boot with MPC8349E

Chu hanjin-r52514 Hanjin.Chu at freescale.com
Wed Oct 19 09:12:53 CEST 2005


What is your on board switch setting for u-boot 1.1.2, what is your oscillator frequency?
Knowing the u-boot 1.1.3 defaulty bootup by reading Hardware Reset Configuration Word from BCSR.


Best Regards

============================ 
Neil Chu 
Freescale Semiconductor Inc. 
============================ 



-----Original Message-----
From: u-boot-users-admin at lists.sourceforge.net
[mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of McClintock
Matthew-R56630
Sent: Wednesday, October 19, 2005 3:01 PM
To: flobe01 at arcor.de
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] U-Boot 1.1.3 does not boot with MPC8349E


Did you find a solution to your problem? Neil Chu just sent a patch in
today that corrects values in the MPC8349 readme. Can you give a listing
of the commands you used to program the new u-boot onto your board?

-Matthew


On Mon, 2005-10-10 at 18:15 +0200, flobe01 at arcor.de wrote:
> Has anybody tried to bring up U-Boot 1.1.3 together with a (Power Quicc II Pro) MPC8349E MDS Processor Board (silicon rev 1.0)? The board comes with a (probably patched) 1.1.2 version installed. I want to update it to 1.1.3 in order to be able to use a current Linux kernel (2.6.13 - U-Boot 1.1.2 seems to be incompatible due to differences in the bd_info structures, right?).
> 
> After building U-Boot and writing to the flash according to the README, the board does show no more signs of life (apart from the reset sequence leds) after hard reset.
> 
> I used crosstool 0.38 for building the tool chain with a standard ppc target (-mcpu=powerpc) and gcc 3.4.1.
> 
> Are there any board settings necessary other than those defaults in the Getting Started guide?
> 
> Thanks and regards,
> Florian.
> 
> 
> Machen Sie aus 14 Cent spielend bis zu 100 Euro!
> Die neue Gaming-Area von Arcor - über 50 Onlinespiele im Angebot.
> http://www.arcor.de/rd/emf-gaming-1
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by:
> Power Architecture Resource Center: Free content, downloads, discussions,
> and more. http://solutions.newsforge.com/ibmarch.tmpl
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users




More information about the U-Boot mailing list