[U-Boot-Users] BDI2000 and MPC8260

Pantelis Antoniou pantelis.antoniou at gmail.com
Thu Sep 1 20:43:43 CEST 2005


On Thursday 01 September 2005 20:42, Dan Malek wrote:
> On Sep 1, 2005, at 6:43 AM, Alex Zeffertt wrote:
> > The problem I am seeing is that the bdi2000 cannot communicate with
> > the PM828 if the HRW is not
> > present in the flash device.
>
> That doesn't sound quite right, but worst case all you need to do
> is pull RSTCONF to ground and the 82xx will use an internal
> configuration word to get you going.
>
> Thanks.
>
> 	-- Dan
>
>

Yes, that's absolutely true.

If your boot flash is not written correctly, you'd better
have a way to pull RSTCONF low. Different BDI settings are
required however, beware.

Regards

Pantelis




More information about the U-Boot mailing list