[U-Boot-Users] lastest 1.1.3 CONFIG_SKIP problems with arm920t on rm9200.

Andrey P. Vasilyev andrey_vasilyev at mail.ru
Mon Sep 19 19:26:04 CEST 2005


On Mon, Sep 19, 2005 at 07:15:27PM +0200, Mathieu Deschamps wrote:
> Hello,
> I have upgraded U-Boot 1.1.2 to lastest 1.1.3. I still uses the boot.bin 
> program to set up the flash and the dram and such while having

I've tried similar configuration recently. My board has only a
DataFlash, not parallel flash, and I'm forced to use RomBoot to 
initialize CPU and SDRAM.
It works for me.

I've inserted the following options into 
u-boot-1.1.3/include/configs/at91rm9200dk.h (which I'm using as a 
template for my config), and it works:

Also I've commented "bl lowlevel_init" instruction in 
u-boot-1.1.3/cpu/arm920t/start.S because it is undefined with 
SKIP_LOWLEVEL_INIT option set, and causes linking error.

> Indeed kept undefined I have seen that it breaks everything reaching 
> SoC specific lowlevel_init.S in cpu/.../start.S. Imagine reinitializing flash 
> while reading init values from it, or reinit the memory controller while 
> using it !

Strange... As for me, it only breaks linking because of absence 
lowlevel_init.S in compilation with CONFIG_SKIP_LOWLEVEL_INIT set. See 
above for a solution.

With best regards,
  Andrey Vasilyev

P.S. Sorry for my bad english...

More information about the U-Boot mailing list