[U-Boot-Users] u-boot 834x spd_ram

Aziz Mzili amzili at Ai-Logix.com
Tue Apr 18 18:54:39 CEST 2006

thank you

That's what i thought it should be

-----Original Message-----
From: Dan Malek [mailto:dan at embeddededge.com]
Sent: Tuesday, April 18, 2006 11:45 AM
To: Kumar Gala
Cc: Aziz Mzili; u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] u-boot 834x spd_ram

On Apr 18, 2006, at 9:51 AM, Kumar Gala wrote:

> I'm not aware of any.  I'm just guessing the boards people have  
> were built this way.

I have a board that doesn't use CS2/CS3.  Once I get it running
well I'll submit the patches.  Basically, I created a  #define
in the board configuration header file that indicates the base chip
select used.  I then use this base and base+1 in the code in place of
the hard coded assumption of CS2/3 in the spd_sdram.c file.

	-- Dan

More information about the U-Boot mailing list