[U-Boot-Users] HOWTO port U-BOOT to my board(nios2)

[Wolfgang Denk]

In message <c58062b00608070007h311c887bkd47b02dac1e4a569 at mail.gmail.com> you wrote:
> 
> I just want to port u-boot on my nios2 board(DE2).
> I tried to change the EP1C20.h according to my system.ptf,and used
> "nios2-download -g u-boot" to download the elf to my board.
> It cannt run.

Then start debugging it.

> what are the steps for porting u-boot ?

Read the README. There is a terse , but pretty correct Porting  Guide
section.

> ------=_Part_95370_21396920.1154934438261
> Content-Type: text/html; charset=ISO-8859-1
> Content-Transfer-Encoding: 7bit
> Content-Disposition: inline

And never post HTML on this list.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are three ways to get something  done:  do  it  yourself,  hire
someone, or forbid your kids to do it.