[U-Boot-Users] Building Uboot 1.1.4 problems

[Yan-Ming]

HI
   I am a newbie for boot loader, and I have some problems when update
u-boot 1.1.3 to u-boot 1.1.4 for OMAP2420 H4 ES 2.X Menelaus COMBO.

 First, I got u-boot.bin.gz from
http://linux.omap.com/pub/bootloader/h4/u-boot.bin.gz
 gunzip it and renamed to u-boot.bin.raw.

After that, I used TI OST_Host to burn it to flash. It really work!
and I got the following messages:
******************************
U-Boot 1.1.3 (Feb 27 2006 - 12:26:39)
U-Boot code: 80E80000 -> 80E9C658  BSS: -> 80EA1424
OMAP2420-GP revision 3, PRCM III
TI H4 SDP Base Board + Menelaus Daughter Board + mDDR
RAM Configuration:
Bank #0: 80000000 32 MB
Bank #1: 82000000 32 MB
Flash: 64 MB
In:    serial
Out:   serial
Err:   serial
*****************************************

But when I build u-boot-1.1.4
from ftp://ftp.denx.de/pub/u-boot/u-boot-1.1.4.tar.bz2
using arm-linux-gcc-4.0.2-glibc-2.3.6

#make distclean
#make omap2420h4_config
#make all

I got error message:
common/env_flash.c  row: 267 undefined reference to 'flash_probe'

I try to comment the line 267 and then build with no error message.
Also, I got u-boot.bin and rename it to u-boout.bin.raw.
But after buring to Flash by OST, it shows nothing at all on the terminal.

Could anyone please help me ?
Or could someone email to me a well-builded u-boot.raw for omap2420h4  ?
Best regards.

 ___________________________________________________ 
 最新版 Yahoo!奇摩即時通訊 7.0，免費網路電話任你打！ 
 http://messenger.yahoo.com.tw/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060809/58965352/attachment.htm