[U-Boot-Users] LAN9118 ethernet controller (William Feng)

[William Feng]

Thanks Tim!

I will try that out.

William
On Tue, 2006-12-05 at 09:43 -0600, Tim Braun wrote:
> > Date: Fri, 01 Dec 2006 17:50:45 -0800
> > From: William Feng <wfeng at mysourcecommunications.com>
> > I have an ARM board which has a LAN9118 ethernet controller (SMSC)
> > instead of a LAN91C111 which is supported in u-boot. Is there any
> > existing patch or ongoing work to support it?
> 
> Here's a patch I've got on the shelf against 1.1.3 which should provide
> a driver for you.   It uses CONFIG_NET_MULTI, CONFIG_DRIVER_LAN911X,
> and CONFIG_LAN911x_BASE to configure.
> 
> Tim Braun, Sr. Des. Eng.
> LibreStream Technologies
> 200-55 Rothwell Rd.
> Winnipeg R3P 2M5 
> 
>