[U-Boot-Users] RTL8169 driver not work on PPC8241

[Masami Komiya]

Hi Roger,

Attached file is a new driver for RTL8169.
Please try.

Masami Komiya

Roger Yang(楊仁存) wrote:
> Hi,
> My ethernet can not work based on RTL8169 and MPC8241. I try to use TFTP 
> command to load files. But It can not send out the packets. I found it 
> caused by TxDescriptor not work. Since the owner bit on TxDescriptor can 
> not auto clean by descriptor in the function rtl_send( ). When compile 
> RTL8169.C, a function "virt_to_bus( )" lost. So i define it as the 
> following
> 
> #undef  virt_to_bus
> #define virt_to_bus(x)  ((unsigned long)x)
> 
> Can any one advise me if this definition ok? Or anything I should check?
> 
> Thanks
> 
> Roger Yang
> 
> 
> 
> ------------------------------------------------------------------------
> 
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
-------------- next part --------------
A non-text attachment was scrubbed...
Name: rtl8169.c.gz
Type: application/x-gzip
Size: 6782 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20061213/ff7a8d6b/attachment.bin