[U-Boot-Users] U-boot environment not loading from flash

[Wolfgang Denk]

In message <43ED3544.3040007 at quartics.com> you wrote:
> 
> I am using latest u-boot with an ARM Integrator/CP board (16MB flash).  
> Everything is fine except that when I save the environment in the flash 
> and reboot the system, u-boot restarts with the environment variables it 
> was compiled with, not what has been saved in the flash sector.  I used 
...
> Any clues anyone??

Sounds as if your system was misconfigured.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If you want strict real-time behavior, run in the real  time  schedu-
ling class.  But there are no seatbelts or airbags;  main(){for(;;);}
can hard hang your system.                          -- Bart Smaalders