[U-Boot-Users] u-boot kernel parameters

[Bizzu]

Das U-Boot current source should 'just work' on the ocotea board.

Travis,
I am not sure I understand the question from Simon entirely but:
I am booting the 2.4 head with the u-boot head on Ocotea.
U-boot is in flash and linux in flash or tftp.
All devices on the board accounted for.
Bizzu
--
View this message in context: http://www.nabble.com/u-boot-kernel-parameters-t1077794.html#a2956582
Sent from the Uboot - Users forum at Nabble.com.