[U-Boot-Users] Start with u-boot on at91rm9200 on AT91RM9200-EK

[Wolfgang Denk]

In message <F6726C3E89A64840A5E10310E342A38F01BE93C6 at xchback01.back.harting.intra> you wrote:
>
> because of a new Flash Chip i must compile u-boot and in than implement
> the changes for the Atmel AT49BV6416T, which has different Architecture
> than the AT49BV6416.
> I can build several Versions of u-boot ( 1.1.1, 1.1.4,... ) but all give
> the same Problem. I start with "make at91rm9200dk_config" and then "make
> all" and it gives me a u-boot.bin. When i load it with loader.bin it
> starts and nothing ist done or printed. If i compare with the Atmel

You don't have to be surprised if you chose  a  configuration  for  a
different  system  and  it doesn't work. You have port U-Boot to your
hardware.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Pray: To ask that the laws of the universe be annulled in behalf of a
single petitioner confessedly unworthy.              - Ambrose Bierce