[U-Boot-Users] Start with u-boot on at91rm9200 on AT91RM9200-EK

[Wolfgang Denk]

In message <F6726C3E89A64840A5E10310E342A38F01BE93C9 at xchback01.back.harting.intra> you wrote:
>
> I don't use a new Hardware for now, i use the original Atmel
> AT91RM9200-EK Evaluation Board, which should be supported by Standard -
...
> > > because of a new Flash Chip i must compile u-boot and in than 

So what? Is this the original hardware, or a modified one?


And please keep the list on Cc:

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Knowledge, sir, should be free to all!
	-- Harry Mudd, "I, Mudd", stardate 4513.3