[U-Boot-Users] Start with u-boot on at91rm9200 on AT91RM9200-EK

[Wolfgang Denk]

In message <F6726C3E89A64840A5E10310E342A38F01BE93D0 at xchback01.back.harting.intra> you wrote:
>
> my Board doesn't have any Software, the Flash is empty and so i start from
> the internal ROM - clearly.

No, this is not so clear at all. You can for example just program the
U-Boot image to flash using a JTAG debugger.

> This is the Atmel described way to initialize a "new" System or to do an Up
> date.

As mentioned before: please conatact  Atmel  support  with  questions
about or problems with the way Atmel recommends to do things.

Here we support the public U-Boot code only, not some vendor provided
(and most probably obsolete) versions.

> But with the original u-boot Sources 1.1.1 or 1.1.4 the generated u-boot.bin
> doesn't run, the Atmel delivered binary u-boot.bin does.

Your statement is wrong. The images run perfectly fine here both on a
AT91RM9200-DK kit and on a couple of custom boards.

> So i'm looking what to do with u-boot, so that it is loadable like the Atmel one.
> Who knows if there are any #defines to set (especially for this CPU/Platform)
> or where any Dokumentation for this can be found ?

Please READ the previous replies you got. I wonder  why  I  take  the
time to answer your questions when you ignore my replies?


Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Quote from the Boss after overriding the decision of a task force  he
created  to  find  a  solution:  "I'm  sorry  if  I ever gave you the
impression your input would have any effect on my  decision  for  the
outcome of this project!"