[U-Boot-Users] Changes required in the U-Boot to make to ethrnet interfaces up in U-Boot

[Shantanu Nalage]

Hi all,
        We are running U-Boot on Xilinx XUPV2Pro board. The board is
quite similar to the Xilinx ML300 board. Original board has one
ethernet interface. In order to embed the functionality of router to
the board, we designed a daughter board to provide additional ethernet
interfaces. The Board Support Package files for the board along with
the daughter card are generated in Xilinx.
        In order to make both the interfaces visible in U-Boot what
changes are required in the U-Boot?

Thank you in anticipation.

With regards,
Shantanu.