[U-Boot-Users] Changes required in the U-Boot to make to ethrnet interfaces up in U-Boot

mONStR Monstr at seznam.cz
Mon Jun 5 09:02:55 CEST 2006


all setting about ethernet controllers are in folder board/xilinx/xilinx_enet. You must change emac_adapter.c whitch is writing only for one interface. Read this file and you see how it's work. And then you must add information about this interface.

Michal Simek
Czech Technical University

>  Hi all,
>          We are running U-Boot on Xilinx XUPV2Pro board. The board is
>  quite similar to the Xilinx ML300 board. Original board has one
>  ethernet interface. In order to embed the functionality of router to
>  the board, we designed a daughter board to provide additional ethernet
>  interfaces. The Board Support Package files for the board along with
>  the daughter card are generated in Xilinx.
>          In order to make both the interfaces visible in U-Boot what
>  changes are required in the U-Boot?
>  Thank you in anticipation.
>  With regards,
>  Shantanu.

More information about the U-Boot mailing list