[U-Boot-Users] Using at91 with a different parallel flash request for help

[Roman Kolesnikov]

Hello,
I am using a similar to at91rm9200ek board. The board is very similar to 
that of at91rm9200ek, except that the framebuffer is off and few other 
minor changes.

I am also using an atmel parallel flash. It is 8 MB = 4M x16  by Atmel 
at49bv6416c.  When I boot u boot 1.1.4 my sdram shows up (all 32MB) but 
my bank 1 shows 0.

I am reading the board setup files and flash.c, but I am not shure what 
specifically to look for.

Please advice,
Roman