[U-Boot-Users] [PATCH] Added hardware SPI support for MPC8349

[Ben Warren]

Hello,

Attached is a patch that adds hardware SPI support for the MPC834x CPU,
and as an example, the MPC8349EMDS evaluation board.  The only new
configuration option is CONFIG_HARD_SPI.  Andy Fleming made a good
suggestion of putting the driver code in /drivers.  I don't think the
driver is generic enough at this time (depends heavily on the MPC8349's
internal memory map), so for now it's in /cpu/mpc83xx.  If future SPI
controllers use the same data structures this will be easy to port.

CHANGELOG:

Added hardware SPI functionality for MPC834x-based boards.
Communications over the SPI bus can be performed either through the
spi_xfer() function call or via the 'sspi' command which is enabled by
CFG_CMD_SPI flag.

regards,
Ben
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060613/0e890621/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: HARD_SPI.patch
Type: text/x-patch
Size: 12266 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20060613/0e890621/attachment.bin