[U-Boot-Users] u-boot hangs in ./cpu/mpc8xx/cpu_init.c when changing br0
wd at denx.de
Wed Jun 21 22:57:07 CEST 2006
In message <1628E43D99629C46988BE46087A3FBB95C58A9 at ep-01.EmbeddedPlanet.local> you wrote:
> But back to the problem.
There is a longish commet in this source file, lines 127...149.
> r28 holds the value 0xfa200100 (the location of br0)
> At line 118, br0 is loaded into r0. r0 then holds 0xfc000001.
> At line 119, r0 becomes 0x00000000. <<-- This is the problem, I think
> At line 120, r0 becomes 0x00000001
> At line 121, r0 is saved to br0 (the address pointed to by r28).
> (br0 becomes 0x00000001)
The C comment says: "Clear everything except Port Size bits, then add
just the "Bank Valid" bit". Looks as if exactly this was happening.
What's the problem?
> The program fails at ln 180 with:
> "Program received signal SIGABRT, aborted."
> But by this time, br0 was reloaded with CFG_BR0_PRELIM from line 176.
> Any more ideas?
> -----Original Message-----
> From: wd at denx.de [mailto:wd at denx.de]
> Sent: Tuesday, June 20, 2006 5:53 PM
> To: Jeff Mann
> Cc: u-boot-users at lists.sourceforge.net
> Subject: Re: [U-Boot-Users] u-boot hangs in ./cpu/mpc8xx/cpu_init.c when
> changing br0
Please don't top post / full quote. Read
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Gravitation cannot be held responsible for people falling in love."
- Albert Einstein
More information about the U-Boot