[U-Boot-Users] 1.1.4 and 2.6 kernel

alfred hitch alfred.hitch at gmail.com
Tue Jun 27 12:47:16 CEST 2006


Hi Ilya,

Thanks for your reply.

Can you please help me understand what params you are referring to ?

I had changed my u-boot configs file to use:
#define CONFIG_BOOTARGS         "console=ttyS1,115200
root=/dev/mtdblock4 rw, mem=64M at 0x00000000"

Note the change from default ttyS0 to ttyS1.

And linux bootargs I see xconf as :
console=ttyS1,115200 root=/dev/mtdblock4 mem=64M at 0x00000000

So, they look more or less ok ??

With same u-boot  I can get 2.4 working.
So, what could I be missing here.

Wolfgang: Apologise for html mail, my mistake. But I do see this issue
as falling on the line between u-boot and linux. Not sure if linux
guys will also push me to u-boot back again.
So, please see if you can offer some advice.

Regards,
Alfred



On 6/27/06, Ilya Yanok <ilya.yanok at gmail.com> wrote:
> alfred hitch wrote:
> > I am trying to get 2.6 kernel boot on a plattfor very similar to ixdp425.
> > We already have u-boot 1.1.1 and 2.4 kernel working for us. But, while
> > trying to get the 2.6 working.
> >
> > I get the Booting image at XXXX
> > XXXX
> > Starting Kernel ...
> >
> > And after that nothing.
> >
> > At this stage I am expecting the "Uncompressing Linux ......"
> Looks like kernel doesn't use serial console, have you provided correct
> console= boot argument?
>
> > What could be going wrong ? Same board, if I put in 2.4 on a 1.1.4
> > version u-boot, it boots fine.
> >
> > Is it some tty redirection issue ??
> > Only change from IXDP425 board is sdram configuration and ttyS1 for
> > console instead of ttyS0.
> > Suspecting later but then 2.4 shouldnt' have also booted up ?
>
> I'm pretty sure that serial device of your board was renamed from ttyS
> to something more specific in 2.6 kernel. Check this.
>
> Second possible reason is that you don't have boot arguments support in
> u-boot (your 2.4 kernel may have precompiled boot arguments, check
> kernel configuration).
>
>         Ilya.
>
>
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
>




More information about the U-Boot mailing list