[U-Boot-Users] 1.1.4 and 2.6 kernel

[Gary Sanders]

Alfred,
 
There was something about new kernels not working with old boot loaders
due to the way clock speeds are passed to the kernel.   And I believe
the error you described below is the one they identified.  Prior to
2.4.5, they expected MHz.  Try changing the envar clocks_in_mhz to 0 to
get it pass Hz instead.
 
Gary


  _____  

	From: u-boot-users-bounces at lists.sourceforge.net
[mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of alfred
hitch
	Sent: Tuesday, June 27, 2006 1:44 AM
	To: u-boot-users at lists.sourceforge.net
	Subject: [U-Boot-Users] 1.1.4 and 2.6 kernel
	
	
	Hi All,
	
	I am trying to get 2.6 kernel boot on a plattfor very similar to
ixdp425.
	We already have u-boot 1.1.1 and 2.4 kernel working for us. But,
while trying to get the 2.6 working.
	
	I get the Booting image at XXXX 
	XXXX
	Starting Kernel ...
	
	And after that nothing.
	
	At this stage I am expecting the "Uncompressing Linux ......"
	
	What could be going wrong ? Same board, if I put in 2.4 on a
1.1.4 version u-boot, it boots fine.
	
	Is it some tty redirection issue ?? 
	Only change from IXDP425 board is sdram configuration and ttyS1
for console instead of ttyS0.
	Suspecting later but then 2.4 shouldnt' have also booted up ?
	
	I am new to u-boot and would appreciate some help on issue. any
pointers ?
	
	Regards,
	Alfred
	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060627/b025c3dc/attachment.htm