[U-Boot-Users] 1.1.4 and 2.6 kernel

Wolfgang Denk wd at denx.de
Tue Jun 27 22:24:28 CEST 2006

In message <A6B3D2F0FED7564699FFE261012FF2AB02FB3EC6 at samson.internal.mediabolic.com> you wrote:
> There was something about new kernels not working with old boot loaders
> due to the way clock speeds are passed to the kernel.   And I believe
> the error you described below is the one they identified.  Prior to
> 2.4.5, they expected MHz.  Try changing the envar clocks_in_mhz to 0 to
> get it pass Hz instead.

This is for PowerPC only; no other architecture uses bd_info.

>   _____ 
> 	From: u-boot-users-bounces at lists.sourceforge.net
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of alfred
> hitch
> 	Sent: Tuesday, June 27, 2006 1:44 AM
> 	To: u-boot-users at lists.sourceforge.net
> 	Subject: [U-Boot-Users] 1.1.4 and 2.6 kernel

Please don't top-post / full quote.

Please read the netiquette - see

> ------_=_NextPart_001_01C69A16.2C7CBF2E
> Content-Type: text/html;
> 	charset="us-ascii"
> Content-Transfer-Encoding: quoted-printable

And *NEVER* post HTML here!

Wolfgang Denk

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I've seen it. It's rubbish."          - Marvin the Paranoid Android

More information about the U-Boot mailing list