[U-Boot-Users] cfi_flash.c

Spinelli, Claudio (Claudio) claudio at lucent.com
Wed Mar 1 20:53:41 CET 2006

 Hi Wolfgang,

Yes, I should have been more specific. 
How do you find out if a flash is compatible with CFI interface? 
I have:
 AMD AM29F040

Do you know if the above flashes are compatible with CFI?


-----Original Message-----
From: wd at denx.de
To: claudio123
Cc: u-boot-users at lists.sourceforge.net
Sent: 3/1/06 2:54 AM
Subject: Re: [U-Boot-Users] cfi_flash.c 

In message <3176526.post at talk.nabble.com> you wrote:
> I am looking for a flash driver that would work with both the new
flash part
> (J3D)supported by cfi_flash.c and the old flash (28F256J3C), or better
yet a
> driver that would support the flash parts supported by new cfi_flash
.c  as
> well as the old parts supported by flash.c and flash64.c

You should be a bit more specific. Which "flash.c"? There are  nearly
200 files by that name in the U-Boot tree!

In general, you should use the CFI driver and fix any problems /  add
any code that might be missing there.

Best regards,

Wolfgang Denk

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
They weren't that important. They were merely at the top. The  people
who  really  run organizations are usually found several levels down,
where it's still possible to get things done.
                                      - Terry Pratchett, _Small Gods_

More information about the U-Boot mailing list