[U-Boot-Users] Target hangs during relocate_code() call

[Jon Loeliger]

On Thu, 2006-03-02 at 10:33, Rick Nardone wrote:
>  
> U-Boot 1.1.4 (Mar  2 2006 - 10:27:01)
> CPU:   8540, Version: 1.0, (0x80300010)
> Core:  E500, Version: 1.0, (0x80200010)
> 
> Clock Configuration:
>        CPU: 396 MHz, CCB: 132 MHz,
>        DDR:  66 MHz, LBC:  66 MHz
> L1:    D-cache 32 kB enabled
>        I-cache 32 kB enabled
> Board: Wind River SBC8540 Board

> call to relocate_code()
> 
> Dest Addr =0x1FFADF48, Src Addr = 0x1FFADF60, size = 536674304 bytes

Almost certainly, your DDR setup is incorrect.
Verify that you are programming your DDR controller
properly according to the specs.

jdl