[U-Boot-Users] compatibility of uboot 1.1.1 with the linux 2.6.11.3 or linux 2.6.x kernels

[prafulla chandra vejendla]

Hi,
i havent changed any environment variable before and after the download to
save the environment . before that i set the ipaddress and ethernet attress
and serverip parameters i saved those variables before itself.
my doubt is* can i use the same uboot 1.1.1 for any kernal i.e for linux
2.4.x or for linux 2.6.x* .is that version is compatible .*in the omap ti
page they mentioned if u are using linux2.6.x then u should use uboot 1.1.2.
*
*why is it so *.
what would be the* problem if i use inbuilt uboot 1.1.1 for my board for
linux2.6.x??*
* is that error " bad crc error "  due to that only ?? or due to any other
factor* .
please let me know ...
thanks in advance
-prafulla


On 3/6/06, Thomas Stark <Thomas.W.Stark at informatik.stud.uni-erlangen.de>
wrote:
>
> Hi,
>
> > once i flashed into the kernal to memory i
> > am getting the crc check error as bad crc check  why is it so ??
>
> Did you call "saveenv"? You will always get the crc check error, if you
> don't save your environment.
>
> >Content-Type: text/html; charset=ISO-8859-1
> >Content-Transfer-Encoding: quoted-printable
>
> And please don't post HTML on this list!
>
> Bye,
> Thomas
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060307/473474c2/attachment.htm