[U-Boot-Users] ENMON# in TQM860L?
Martin.Krause at tqs.de
Tue Mar 14 14:18:30 CET 2006
u-boot-users-admin at lists.sourceforge.net wrote on Tuesday, March 14,
2006 8:54 AM:
> Dear all:
> In the Spec. of TQM860L, the signal ENMON# is mentioned.
> I want to know the ENMON# is connected with "which pin" of
There is no permanent connection between ENMON# and a cpu pin.
The pin is connected with PA15 only for a short period of time
after a power on reset (about 10 ms). Thus, if you want to read
the state of the ENMON# pin, this is only possible in the first
10 ms after a reset. After this time PA15 of the cpu is connected
with PA15 of the module connector.
More information about the U-Boot