[U-Boot-Users] LCD on OMAP2430 target

[Wolfgang Denk]

In message <4F9B2712E6C4C74582548D2260EE1D2D9E2469 at ct11exm64.ds.mot.com> you wrote:
> 
> After I built my changes with U-Boot and flashed the image, I turn on
> the board and get the following message:
>  
> U-Boot 1.1.3 (Mar 28 2006 - 17:48:08)
>  
> 
> U-Boot code: 80E80000 -> 80EA1450  BSS: -> 80ECC518
> OMAP2430C-GP revision 0, PRCM #5A
> TI 2430SDP Base Board + 0.1 Version + mDDR
> RAM Configuration:
> Bank #0: 80000000 128 MB
> Bank #1: 88000000  0 kB
> Flash: 64 MB
> NAND:64 MB
> *** Warning - bad CRC, using default environment
> 
> 
> This message is coming from common/env_common.c file. Can anyone help me
> identify the mistake? 

What are you complaining about? I don't see any evidence of a problem
in this output. Did you read the FAQ?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Man is the best computer we can put aboard a spacecraft ...  and  the
only one that can be mass produced with unskilled labor.
                                                  - Wernher von Braun