[U-Boot-Users] Re: [Skyeye-developer] U-Boot on simulated at91rm9200/ep7312 boards (skyeye)

[Vijairaj]

On 3/30/06, Rohit <rohits79 at gmail.com> wrote:
> Hi,
>
>  Input/output is ignored at the boot prompt for the at91rm9200 board
>  (1) I have had success loading u-boot for ep7312 board via skyeeye emulator
> while the u-boot for at91rm9200 simply doesn't takes any key strokes
> whatsoever at the boot prompt.

I had the same problem and applied a quick fix against skyeye-1.2.0-RC4.
Its ugly but nevertheless should serve the purpose. I used a fresh
u-boot (version u-boot-1.1.3) configured with at91rm9200dk_config.

HTH

--
Vijairaj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: skyeye_at91rm9200.patch
Type: text/x-patch
Size: 7194 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20060331/b232c532/attachment.bin 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: skyeye.conf
Type: application/octet-stream
Size: 315 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20060331/b232c532/attachment.obj