[U-Boot-Users] Intel 28F256J3C

[Stefan Roese]

Hi Xuxian,

On Wednesday 31 May 2006 09:48, Wolfgang Denk wrote:
> In message <447d42b2.45c5968f.442a.ffff9351 at mx.gmail.com> you wrote:
> > I try to make u-boot work on my board which is similar with OMAP5912OSK.
> > But the flash we using is 28F256J3C. I have already added 28F256J3C's
> > manufacture code and device id in the proper position of u-boot. But
> > there are several questions I can't figure out.
>
> Any reason for not using the CFI driver?

Please take Wolfgangs advice and use the common CFI flash driver. The current 
U-Boot OMAP5912OSK port also uses this driver. It should work without any 
changes with your flash type.

Best regards,
Stefan